CHOOSE WITH CONFIDENCE

COMPARE LIGHTS.

Find the right light for your build. Match by format and intended role, then compare useful control, fit and power tradeoffs.

Published models. All four brands.SHO, VHO and UHO remain separate configurations. Each comparison uses the selected model’s own specifications.

Comparing Z8i UHO with RIGID ADAPT 20″. Showing Control & backlight.

RACE LIGHTS / Z8i UHOZ8i UHO Zenith Bar Dual-Color

Z8i UHO vs. ADAPT 20″

Tune color.
Shape your beam.

Choose white + amber or white + yellow, then tune individual modules and save the setups you actually use. Main-beam control and per-channel RGBW accents remain separate.

20″ BARZenith UHO38.6 A MAX @ 12 V
01

24 presets versus two

Save more driver-selected setups for output and individual emitters. ADAPT has two presets plus GPS automation; Zenith emphasizes your programmed beam settings.

02

Change optics in under 5 seconds

Five solid-polycarbonate TIR choices use a sealed bayonet bezel. Swap a module’s optic quickly for race service or beam tuning; competitors also offer serviceable lenses.

03

Use the power your rig can supply

Set a current / power cap and prioritize the optical modules you need. This model publishes up to 464 W; the cap and wiring must suit your installation.

PUBLISHED RATINGS

Race / Z8i UHO

40,936 lm max

464 W max · one light

RIGID / ADAPT 20″

13,696 raw lm listed operating point

160 W listed operating point

Compare one Race light with one selected fixture or complete bar. Published methods and operating modes differ; these ratings do not rank measured brightness, beam distance or sustained output.

Match basisOne complete 20″ Race bar versus one ADAPT 20″. Matched by nominal length and off-road role; output, optics and power differ. ADAPT’s main beam is white; this Zenith configuration adds adjustable white/color output.

ADAPT also has selectable accent lighting, eight beam modes and GPS speed-based adjustment. Race adds finer driver-programmed emitter control and quick-change optics; GPS automation is not a Zenith claim.

Compare specifications & controls
Z8i UHO versus RIGID ADAPT 20″. Control & backlight. Manufacturer specifications, not independent performance tests.
The detailRACE LIGHTSZ8i UHORIGIDADAPT 20″
Output controlIndividual-emitter output controlEight selectable beam patterns; GPS adaptive mode; two programmable presets
Saved main-output presetsUp to 24 programmable presetsTwo programmable presets + GPS speed-adaptive beam mode
Backlight8-node RGBW backlightSpectrum-selectable accent lighting
Backlight selectionChange RGBW color per backlight channel at any time via the appAccent color selected through ADAPT controller
Connected controlsBluetooth 5.3 / Race mobile app / Race CANbus keypad; check app release compatibilityIncluded dash controller and GPS module
Power managementSet a current / power cap; allocate the available budget across selected optical modulesActive Power Management + GPS-selected beam modes

White + Amber and White + Yellow are separate purchased configurations. RGBW accent lighting is independent of the main beam. External switch panels can add functions; this table describes the selected fixtures and listed controls.

Sources & comparison notes

Confirm harness, keypad/controller and installation hardware included with your selected configuration before ordering.

What the alternative offers. Flagship ADAPT offers eight beam patterns, GPS speed-based adjustment, selectable accent colors and two saved presets with its included dash controller.

The manufacturer table lists an operating point, not a verified maximum across all eight modes. Zenith’s presets do not imply GPS automation; accent colors and saved presets are not exclusive to Race. This 20-inch format comparison uses white main output; Phoenix Connect offers white/amber switching in 30-inch and larger linked-pod formats. Published weight: 8.2 lb for Race versus 10 lb for the alternative.

Competitor source reviewed November 6, 2026. Race catalog snapshot: November 6, 2026. Matched by nominal size and intended role, not identical output or features. Applies to named configurations, not an entire brand. “Not specified” means the reviewed page does not document the feature; it is not proof of absence. Confirm fixture, mounting hardware, supply voltage and electrical capacity.

Raw lumens describe an emitter rating before optical losses; other manufacturers may use a different method. Race’s reviewed tables do not state a measurement method. A lumen total alone does not establish beam intensity, distance, efficiency or sustained output. Dimension reductions use (competitor − Race) ÷ competitor, rounded down. Thermal features describe design, not independently proven reliability.

Choose the controls, optics and electrical load that suit your build. A nominal size is a starting point; actual dimensions decide fit.

Find your setup