Choose Where the Light Goes.
| Pattern | Coverage Priority | What to Check |
|---|---|---|
| Spot | A concentrated forward beam | Does the useful beam reach where you need it, with enough side coverage from the rest of your setup? |
| Flood | Wider nearby coverage | Does it illuminate the trail edges without excessive hood, cabin or foreground reflection? |
| Combo | A combination of forward and wider coverage | Does the balance suit your speed, terrain and mounting position? |
These names describe coverage intent. They do not specify a universal beam angle, distance or brightness. Compare the actual optic configuration and beam data for the light you are considering.
Optics Establish the Base Pattern.
Zenith uses solid hardened-polycarbonate TIR optics held in precision 6061-T6 billet aluminum bezel rings. A bayonet lock and inner and outer O-ring seals support quick replacement and beam tuning.
Race offers five individual optic designs. Those individual optics are distinct from complete-bar Spot, Combo and Flood configurations. Tell Race which terrain and coverage you are planning so the installed combination supports that goal.
Optic replacement takes less than five seconds. That makes damaged-optic replacement and physical beam tuning practical for racing applications. Follow the service instructions and inspect the sealing surfaces whenever an optic is changed.
See Modular Optics ↗Control the Contribution of Each Channel.
Individual emitter control lets Zenith vary how much output passes through each installed optic. For example, a mixed-optic bar can emphasize its forward channels for one preset and its wider channels for another. The controller works within the configured power or current limit.
That is useful when the vehicle cannot support the entire light at maximum output. You can direct the available electrical capacity toward the coverage you need instead of reducing every channel equally.
Go Deeper: Does Electronic Control Change the Optic?
The optic stays physically in place. Electronic control changes each module’s contribution, creating a different combined pattern from the installed optics. It cannot give a flood optic the geometry of a different spot optic. Dual-color models also control the available color arrays; fixed-color bars keep their ordered main-beam color.
For open UTVs and other reflective layouts, check the view from both front seats. Reducing selected channels may help manage spill, but the benefit depends on the actual installation and aim.
See the Race Tech Operating Guide ↗Read Beam Evidence Carefully.
Look for a beam plot or photometric file that matches the exact optics, emitter color and output setting. Beam photographs are useful for context, but exposure, white balance, terrain and camera position affect their appearance.
An IES file describes directional intensity for a specified configuration. A rendering made with illustrative data is a concept, and a photo is not a calibrated lux measurement. Use consistent conditions when comparing lights.
Understand Lumens, Lux and Candela ↗